Home nl Productinformatie Media en Supplies Graphic Systems Solvent based inkjet media Solvent Banner and Canvas

Solvent Banner and Canvas

Flag 110 FR 0,35 mm

Solvent inkjet coated polyester flag for in- and outdoor use. Knitted polyester fabric quality, rip-proof and resistance against water, scratch, cracking, indoor light, and UV sunlight is outstanding. Stunning photo print quality and genuine, brilliant color reproduction with solvent inks!

Flag 110 is fixed on a paper release-liner. After printing, peel off the paper release liner and the product is ready for use.

Brilliant and vivid colors combined with exact coloring and accurate image reproduction
Scratch and crack resistant
Knitted polyester flag fabric
Easy to (hot) cut and to finish
Durable rigid quality
Flame retardant quality B1 4102/1

Application

Flags and Banners
Shop-window displays
Exhibitions and Shows
Indoor- and outdoor signs
Textile and clothing designs

Special Notes
• Check whether the media I compatible with your printer and ink.
• Let your print dry completely (1 hour) for further processing.
• For weatherproof conditions ink needs 24 hours to dry and fixation before placing outdoor.
• If you like to wash the print, be careful with soaps! Some soaps will destroy the image.
• Contact with solvents and other chemicals is not recommended.
• Slight fading or reduction of image quality is possible when used outdoor (depending on conditions).
• The media is flame retardant B1. Check whether the ink is B1 too and of course the final product.
• Always keep in mind the viewing distance for such a type of print which is normally more than 2,5 meters when looking for print quality.

Canvas Artist SB 0,48 mm

Fine artist canvas quality, high-resolution solvent
inkjet coated. For murals, grand format, digital
fine art and photographic reproductions. Blend of polyester and cotton yarns, which give a strong rigid and stretchable quality. Also for grand formats! The natural structure and matt canvas gives the product a real art realistic look and feeling.

Matt natural white 100% Art Canvas
Solvent top coated, for vivid colors and sharp
edge definitions
Pre-Stretched quality
Blend of polyester and cotton yarns
Less sensitive to dimensional change from
weather conditions
Uniform in texture, and perfect stretchable
Mural and grand format rigid quality

Applications

Murals
Grand formats
Digital fine arts
Digital photography
Reproductions
Exhibitions
Indoor banners

Canvas Hera 342 g/m2

Fine gloss canvas quality, high-resolution solvent inkjet coated. For digital fine art and photographic reproductions. Blend of polyester and cotton yarns, which give a strong rigid and stretchable quality. The natural structure and gloss canvas gives the product a real art realistic look and feeling.

Gloss natural white 100% Art Canvas
Solvent top coated, for vivid colors and sharp edge definitions
Blend of polyester and cotton yarns
Less sensitive to dimensional change from weather conditions
Uniform in texture, and perfect stretchable

Applications

Digital fine arts
Roll up systems
Digital photography
Reproductions
Indoor banners
Exhibitions

Special notes
• Canvas Hera has a special inkjet coating that can be damaged by excessive handling. Always handle the media by the edges. Use cotton gloves to prevent fingerprints on the media.
• If you intend to apply a protective spray, allow your prints to dry 24 hours more before doing so.
• Canvas Hera shows high resistance to fingerprints and water when the plot is completely dry, but direct contact with water is not recommended.
• Avoid physical damage, such as creasing or folding especially at corners and edges.
• Any loose threads should be removed before printing to prevent contact with cartridges or other components.
• Store textiles in the right conditions: temperature 20°C / 68°C and relative humidity 50%.
• Leave textiles in the closed plastic bag for at least 24 hours in the print room.
• Put always textiles back in the plastic bag and in the box with the enclosed end-caps. This will protect the textile for future use.
• Never leave textiles in the printer after printing!
• Textile is more subjected to temperature and humidity changes than other media.
This gloss canvas is one of the finest qualities art reproduction and fine artist applications

Poly-Banner SB 0,29 mm

Flexible matt white stiff Pop-up banner media. High quality coated knitted polyester fabric for use in photographic solvent digital inkjet printers. Due the solvent coating vivid colors are possible, combined with superior bleed control &
resolution. Media stays perfectly flat during printing. Weather, UV and vandal resistant.

NOW! Fire Retardant B1!
Coated (solvent) knitted polyester fabric
Photographic quality
Matt white surface
Flexible and stiff
Weatherproof
UV-protected

Application

Pop-up displays
In and outdoor flexible durable signs and banners
Exhibitions and Events
Shop and window displays
Prolonged presentations

Banner 340 340 g/m2

Flexible matt white banner material for in and outside front lit banner applications. Banner 340 offers exceptional outdoor durability.

Banner quality
Soft & delicate surface
Print side: matt white surface
Flexible and lightweight
Weather resistant
UV-protected*
Seamable
Easy to clean with mild soap
Suitable for in and outdoor banners, printed with UV pigment ink.
Applicable up to 5 years

Applications

In and outdoor flexible durable signs and banners
Exhibitions and events
Shop and window displays
Prolonged presentations

Banner 510 510 g/m2

White substrate for small and wide format front-lit displays. Banner 510 is fire retardant B1 and applicable for billboard, banners, building murals and in store displays.

Banner quality
Display and banner quality
Fire retardant B1
Soft & delicate surface
Print side: matt white surface
Heavy weight but flexible
Weather resistant
UV-protected*
Seamable

Applications

Billboard
Building murals
In store displays
In and outdoor flexible durable signs and banners
Exhibitions and events
Shop and window displays

Banner P500 500 g/m2

Banner P500 is a premium coated textile banner, fire retardant B1 and M2 applicable for billboard, banners, building murals and in store displays. White coated textile substrate for large format and ultra large format front-lit displays. This quality is a premium coated fabric for the highest demanding and long term applications.

For use in solvent based piezo printers
Display and banner quality
Fire retardant B1 & M2
Heavy weight
Weather resistant
UV-protected*
Perfect seamable
Easy to clean with mild soap

Applications

Billboard and Building murals
In store displays
In and outdoor flexible durable signs and banners
Exhibitions and events
Prolonged presentations
Shop and window displays

Banner 440 440 g/m2

White substrate for small and wide format front-lit displays. Banner 440 is fire retardant B1 and applicable for billboard, banners, building murals and in store displays.

For use in solvent based piezo printers
Display and banner quality
Fire retardant B1
Weather resistant
UV-protected*
Seamable
Easy to clean with mild soap

Applications

Billboard
Building murals
In store displays
In and outdoor flexible durable signs and banners
Exhibitions and events
Shop and window displays
Prolonged presentations

Special notes
• This material is flame retardant B1. Is the used ink also flame-retardant? Be sure, that the final product reaches this standard!
• Let your print dry completely (24 hour in evaporation room) for further application.
• TEPEDE banner products are compatible with conventional banner finishing methods, such as stitching, grommeting or thermal / high frequency welding. Be very careful with lightweight media such as 350 gram or less with thermal welding!
• Always make a practical test to make sure that the method of attachment is reliable.
• Place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers.
• Place the grommets in the corner on the four layers where the length and width hems cross.
• To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Improper installation can damage the banner. Use a professional installer.

Banner Blockout 510 g/m2

White smooth opaque substrate for both side displays. Banner with black inner layer for zero light transmission. Both sides printable without showing through. No ghosting! No shadows! Banner Blockout is fire retardant B1 and applicable for billboard, banners, building murals and in store displays Suitable for in and outdoor applications, printed with UV pigment ink. Applicable up to 5 years.

Display and banner quality
Blockout quality No showing through
Fire retardant B1
Soft & delicate surface
Print side: matt white surface
Flexible
Heavy weight
Weather resistant
UV-protected*
Seamable

Applications

Billboard
Building murals
In store displays
In and outdoor flexible durable signs and banners
Exhibitions and events
Shop and window displays
Prolonged presentations

Special notes
• This material is flame retardant B1. Is the used ink also flame-retardant? Be sure, that the final product reaches this standard!
• To protect the print against scratches and damage, it is recommended that the media should be handled and used in a clean environment.
• It is not recommended to use a high pressure cleaner.
• After printing let your print dry completely (1 hour) before getting the image wet.
• When selecting print resolution and print quality (speed, banding) always keep in mind the minimal viewing distance; a photo paper is normally seen from 30 cm and outdoor media is viewed from at least 2,5 meter.
• Place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers. Place the grommets In the corner on the four layers where the length and width hems cross. To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Best method is to sew the banner material. Use of heat or glue can damage the base material.
• Always make a practical test to make sure that the method of attachment is reliable.
• Improper installation can damaged the banner. Use a professional installer.

Display Banner Blockout 300 g/m2

White smooth opaque PVC substrate for roll-up displays and Banners.
Black inner layer for zero light transmission Banner Blockout is fire retardant B1 and applicable for banners roll up systems, POS and in store displays. Suitable for in and outdoor applications, printed with UV pigment ink. Applicable up to 5 years.

Display and banner quality
Blockout quality No showing through
Fire retardant B1
Weather resistant

Applications

Roll-up and in store displays
In and outdoor flexible durable signs and banners
Exhibitions and Events
Shop and window displays
Prolonged presentations

Special notes
• This material is flame retardant B1. Is the used ink also flame-retardant? Be sure, that the final product reaches this standard!
• It is not recommended to use a high pressure cleaner.
• After printing Let your print dry completely (24 hour in evaporation room) for further application.
• Viewing distance: Always keep in mind the minimal viewing distance; a photo paper is normally seen from 30 cm and outdoor media is viewed from at least 2,5 meter.
• TEPEDE banner products are compatible with conventional banner finishing methods, such as stitching grommeting. Thermal / high frequency welding is not recommended. Be very careful with lightweight media such as 350 gram or less with thermal welding! Always make a practical test to make sure that the method of attachment is reliable.
• Place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers. Place the grommets In the corner on the four layers where the length and width hems cross.
• To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Improper installation can damaged the banner. Use a professional installer.

Flexer Greyback 470 - 470 g/m2

Very smooth and flexible satin mat opaque substrate (no fabric inside) with grey reverse side.
No ghosting, no showing through. Suitable for in and outdoor applications.
Very stable and perfect flatness no curling! Ideal for POS and Roll-up banner systems!

PVC display, high density quality
Blockout quality, no showing through
Soft & delicate surface
Print side: satin matt white surface
Reverse side: satin matt white surface
UV-protected*
Flexible & rigid

Applications

Roll-up displays and POS
Banners and in store displays
In and outdoor flexible signs
Exhibitions and vents
Shop displays and window displays

Special notes
• It is not recommended to use a high pressure cleaner.
• After printing let your print dry completely (24 hour in evaporation room) for further application.
• Viewing distance: Always keep in mind the minimal viewing distance; a photo paper is normally seen from 30 cm and outdoor media is viewed from at least 2,5 meter.
• TEPEDE banner products are compatible with conventional banner finishing methods, such as stitching grommeting.
• Thermal / high frequency welding is not recommended. Be very careful with lightweight media such as 350 gram or less with thermal welding! Always make a practical test to make sure that the method of attachment is reliable.
• Place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers.
• Place the grommets In the corner on the four layers where the length and width hems cross.
• To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Improper installation can damaged the banner. Use a professional installer.

Flexer Blockout 470 - 470 g/m2

Very smooth and flexible satin mat opaque substrate (no fabric inside) with black inner layer for zero light transmission. Very stable and perfect flatness no curling! Ideal for POS and Roll-up banner systems!
Suitable for in and outdoor applications.

PVC display, high density quality
Blockout quality, no showing through
Soft & delicate surface
Print side: satin matt white surface
Reverse side: satin matt white surface
UV-protected*
Flexible & rigid

Applications

Roll-up displays and POS
Banners and in store displays
In and outdoor flexible signs
Exhibitions and vents
Shop displays and window displays

Flexer Blockout 520 g/m2

PVC display, high density quality
Blockout quality, no showing through
Soft & delicate surface
Print side: satin matt white surface
Reverse side: satin matt white surface
UV-protected*
Flexible & rigid

Applications

In store displays
In and outdoor flexible signs
Exhibitions and events
Shop and window displays

Flexer Backlit 520 g/m2

Very smooth and flexible satin mat white translucent PVC substrate (no fabric inside) Therefore no show through of fabric like ordinary banner backlit PVC. Pure white translucent substrate for small and wide format backlit displays. More clear and visible image with backlight due to lower translucency. Easy draping for large displays.

Backlit high density display quality
no "ghosting" of fabric
soft and delicate surface
felxible and rigid

Applications

Train shelters
Airport light boxes
Exhibitions and events
Shop and window displays

Special Notes
• To protect the print against scratches and damage, it is recommended that the media should be handled and used in a clean environment.
• It is not recommended to use a high pressure cleaner.
• Let your print dry completely (1 hour) before getting the image wet.
• The media and the final plots can be handled and disposed of as photographic vinyl or other similar inkjet vinyl media. For the treatment of ink or ink residue, please refer to your printer manual or supplier.
• Place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers.
• Place the grommets In the corner on the four layers where the length and width hems cross. To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Always make a practical test to make sure that the method of attachment is reliable.
• Improper installation can damaged the banner. Use a professional installer.

Strip Mesh P 360 g/m2

Pure white knitted mesh substrate for wide format displays. Easy printing without ink leak. Simply tear off the backing (non woven) after printing. Strip Mesh is fire retardant B1 and applicable for billboard, banners, building murals, building wraps, indoor wall decoration and in store displays.

Fire retardant B1
Soft & delicate surface
Print side: gloss white surface
Flexible
Heavy weight
Weather resistant
UV-protected*
Seamable
Applicable up to 5 years
Easy to clean with mild soap

Applications

Billboard
Building wraps
Building murals
In store displays
Indoor wall decoration
In and outdoor flexible durable signs and banners
Exhibitions
Events
Shop displays
Window displays

Strip Mesh 330 g/m2

Pure white knitted mesh substrate for wide format displays. Mesh is fire retardant B1 and applicable for billboard, banners, building murals, building wraps, indoor wall decoration and in store displays. Suitable for in and outdoor applications, printed with UV pigment ink. Applicable up to 5 years.

Soft & delicate surface
Fire retardant B1
Flexible
Rigid quality
Weather resistant
Seamable
Easy to clean with mild soap

Applications

Billboard
Building wraps and murals
In store displays
Indoor wall decoration
In and outdoor flexible durable signs and banners
Exhibitions and events
Window displays

Special Notes
• To protect the print against scratches and damage, it is recommended that the media should be handled and used in a clean environment.
• It is not recommended to use a high pressure cleaner.
• Let your print dry completely (1 hour) before getting the image wet.
• When selecting print resolution and print quality always keep in mind the minimal viewing distance; a photo paper is normally seen from 30 cm and outdoor media is viewed from at least 2,5 meter.
• For finishing place the grommets in the hemline along the length of the banner, so the grommets are fixed on two layers. Place the grommets In the corner on the four layers where the length and width hems cross. To increase the durability when hung, reinforcement of the corners is recommended.
• The hem can be taped with industrial high tack tape. When stitching the material, be careful not to scratch the printed (coated) side. A double hem and a maximum of 2 stitched per centimetre is recommended.
• Best method is to sew the banner material. Use of heat or glue can damage the base material.
• Always make a practical test to make sure that the method of attachment is reliable.
• Improper installation can damaged the banner. Use a professional installer.
• This material is flame retardant B1. Is the used ink also flame-retardant? Be sure, that the final product reaches this standard!