Solvent Vinyl Adhesive

Vinyl Adhesive M80 0,08 mm

High gloss white adhesive vinyl; economical quality and easy applications. The micron-smooth UV protected surface ensures high quality printing with good area fillings and sharp images, top formulated to promote quick drying of inks and resins.

  • Matt white polyester film 
  • Gloss white UV protected adhesive vinyl 
  • Monomeric calendered quality 
  • Brilliant colours with excellent sharp edge definition. 
  • Cadmium Free 
  • Water based acrylic adhesive permanent 
  • Siliconised craft coated double calendered backing paper

Application

  • Short term in and outdoor advertising
  • Stand building
  • Indoor durable signs and displays
  • Exhibitions
  • Events

Special Notes
• Vinyl Adhesive M80 is resistant to most oils and fats, fuels, aliphatic solvents, mild acids, salts and alkali such as:
- Salt water 10°C to 75°C, 2000 h, no effect
- Motor oil 20W/50, 500 h, no effect
- Transmission fluid, 500 h, no effect
- Anti frost, 500 h, no effect
- Petrol, 24 h, no effect
• Test method:
Samples of Vinyl Adhesive M80 were applied to enamelled steel-sheet one hour before testing. Samples were immersed in the specified test-agent at room temperature then removed after the test times noted above.
• Average durability is 1 to 3 years in middle European conditions.
• Exposure to severe temperatures, intense ultra-violet light, as well as conditions in southern-European countries, tropical, sub-tropical, desert regions, in industrially polluted areas or high altitudes, may reduce durability to four years or less.
• Correct substrate preparation and maintenance of vinyl will enhance durability.
• Temperature ranges:
Application >5°C
End-use -30°C to + 80°C
Storage (optimum) 15°C to 25°C
• Before application, surface has to be clean from dust and grease.
• Surface and substrate must have the right and same temperature.
• No tension during application.
• Respect saturation point of vinyl from ink.
• Printed substrate has to be dry: let the print ‘breathe' during at least 1 week before application so that the solvents can exit into the free air.
• Protect edges and overlaps against the driving direction of the vehicle
• Avoid industrial car wash; certainly avoid ‘methanol' as cleaning product.
• Avoid spraying with high pressure cleaner against the overlap.
• Influence of migration of solvent ink towards PVC and adhesive is tested permanently. Solvent inks definitely attack PVC and adhesive properties and characteristics: adhesion, cohesion, deposit of adhesive etc. DON`T UNDERESTIMATE THIS!
• Big losses in adhesion are influenced by the kind of PVC used, the kind and amount of solvents in the ink, conditioning after printing (be aware that ventilation and evaporation of solvents is strictly necessary).
• Recommended application surfaces are: Aluminium, car enamel, glass, stainless steel, ABS, Plexiglas.
• The Vinyl is designed for use on smooth surfaces.
• To prevent smears, let your prints dry completely. When laminating (cold) let your prints dry 20 minutes more before starting to laminate.
• The media and the final plots can be handled and disposed of as photographic vinyl or other similar inkjet vinyl media. For the treatment of ink or ink residue, please refer to your printer manual or supplier.

UP

Vinyl Adhesive M90 0,09 mm

High gloss white adhesive vinyl for low cost, short term and easy large format flat applications.

  • Monomeric calendered quality
  • Brilliant colours
  • Cadmium Free
  • Solvent based acrylic adhesive permanent
  • Siliconised craft coated calendered backing paper

Applications

  • Short term in and outdoor advertising

Special Notes
• Vinyl Adhesive M90 is resistant to most oils and fats, fuels, aliphatic solvents, mild acids, salts and alkali for a short period
• Average durability is 1 to 6 months in middle European conditions
• Exposure to severe temperatures, intense ultraviolet light, as well as conditions in southern-European countries, tropical, sub-tropical, desert regions, in industrially polluted areas or high altitudes, may reduce durability to four years or less
• Correct substrate preparation and maintenance of vinyl will enhance durability
• Temperature ranges
• Application >10°C
• End-use -30°C to +80°C
• Storage (optimum) 22°C
• Before application, surface has to be clean from dust and grease
• Surface and substrate must have the right and same temperature
• No tension during application
• Respect saturation point of vinyl from ink
• Printed substrate has to be dry: let the print ‘breathe' during at least 1 week before application so that the solvents can exit into the free air.
• Protect edges and overlaps against the driving direction of the vehicle
• Avoid industrial car wash; certainly avoid ‘methanol' as cleaning product.
Avoid spraying with high pressure cleaner against the overlap
• Influence of migration of solvent ink towards PVC and adhesive is tested permanently. Solvent inks definitely attack PVC and adhesive properties and characteristics: adhesion, cohesion, deposit of adhesive etc. DON`T UNDERESTIMATE THIS!
• Big losses in adhesion are influenced by the kind of PVC used, the kind and amount of solvents in the ink, conditioning after printing (be aware that ventilation and evaporation of solvents is strictly necessary).
• Recommended application surfaces are: Aluminium, car enamel, glass, stainless steel, ABS, Plexiglas.
• The Vinyl is designed for use on smooth surfaces.
• To prevent smears, let your prints dry completely. When laminating (cold) let your prints dry 20 minutes more before starting to laminate.
• The media and the final plots can be handled and disposed of as photographic vinyl or other similar inkjet vinyl media. For the treatment of ink or ink residue, please refer to your printer manual or supplier.

UP 

Vinyl Adhesive SWG 0,075 mm

Vinyl Adhesive SWG (Solvent White Gloss) is a high gloss white adhesive vinyl formulated to promote quick drying of inks and resins. The micron-smooth UV protected surface ensures high quality printing with good area fillings and sharp images. This film is the first choice for making high quality and low cost advertisings or labels.

  • Gloss white UV protected adhesive vinyl
  • Excellent printability
  • Monomeric calendered quality
  • Brilliant colours with excellent sharp edge definition
  • Cadmium Free
  • Solvent based acrylic adhesive
  • Siliconised craft coated double calendered
    backing paper
  • Suitable for most large format plotters

Applications

  • In and outdoor advertising
  • Stand building
  • Indoor durable signs and displays
  • Exhibitions and events
  • Shop displays

UP

Vinyl Adhesive SWM 0,075 mm

Vinyl Adhesive SWM (Solvent White Matt) is a matt white adhesive vinyl formulated to promote quick drying of inks and resins. The micron-smooth UV protected surface ensures high quality printing with good area fillings and sharp images. This film is the first choice for making high quality and low cost advertisings or labels.

  • Matt white UV protected adhesive vinyl
  • Excellent printability
  • Monomeric calendered quality
  • Brilliant colours with excellent sharp edge
  • finition
  • Cadmium Free
  • Solvent based acrylic adhesive
  • Siliconised craft coated double calendered
    backing paper
  • Suitable for most large format plotters

Application

  • In and outdoor advertising
  • Stand building
  • Indoor durable signs and displays
  • Exhibitions and events
  • Shop displays

UP

Vinyl Adhesive P75 0,075 mm

Vinyl Adhesive P75 is a high gloss white Polymeric adhesive vinyl. The smooth UV protected surface ensures high quality printing with good area fillings and sharp images. This film is the first choice for high quality applications. Adhesive Vinyl is connected on a PE coated release liner. During printing ideal flat laying properties and better heat transfer to the vinyl. Average durability is 3 to 5 years in middle European conditions. Exposure to severe temperatures, intense ultra-violet light, as well as conditions in southern-European countries, tropical, sub-tropical, desert regions, in industrially polluted areas or high altitudes, may reduce durability to four years or less. Correct substrate preparation and maintenance of vinyl will enhance durability.

  • Polymeric calendered quality
  • Gloss white UV protected adhesive vinyl
  • Excellent printability
  • Brilliant colours with excellent sharp edge definition.
  • Cadmium Free
  • Solvent based acrylic adhesive
  • PE (Poly ethylene) Siliconised craft coated double calendered backing paper for better flat laying properties

Applications

  • In and outdoor advertising
  • Fleet marking
  • Stand building
  • Indoor durable signs and displays
  • Exhibitions and events
  • Shop displays

UP

Vinyl Adhesive Blackout 0,10 mm

Vinyl BLACKOUT is a high gloss white adhesive vinyl with a black adhesive reverse side. With thickness of 0.1 mm and semi-permanent glue + blackout it's easy to apply and to remove. Ideal for short term use on excising fleet marking, fleet commercials or other applications. Average durability is 3 years in middle European conditions. Exposure to severe temperatures, intense ultraviolet light, as well as conditions in southern-European countries, tropical, sub-tropical, desert regions, in industrially polluted areas or high altitudes, may reduce durability to four years or less.

  • Gloss white UV protected adhesive vinyl
  • Acrylic black adhesive (block out)
  • Excellent printability
  • 0.1 mm Monomeric calendered quality
  • Brilliant colours with excellent sharp edge definition
  • Cadmium Free
  • Siliconised clay coated release liner paper

Applications

  • In and outdoor advertising
  • Stand building
  • Indoor durable signs and displays
  • Exhibitions and events
  • Fleet market
  • Shop displays

Special notes
• Is resistant to most oils and fats, fuels, aliphatic solvents, mild acids, salts and alkali.
• Test method:
Samples of Vinyl were applied to enamelled steel-sheet one hour before testing. Samples were immersed in the specified test-agent at room temperature then removed after the test times noted above.
• Temperature ranges: Application >10°C; End-use -45°C to +90°C; Storage (optimum) 15°C to 20°C
• Before application, surface has to be clean from dust and grease.
• Surface and substrate must have the right and same temperature.
• No tension during application.
• Respect saturation point of vinyl from ink.
• Printed substrate has to be dry: let the print ‘breathe' during at least 1 week before application so that the solvents can exit into the free air.
• Protect edges and overlaps against the driving direction of the vehicle
• Avoid industrial car wash; certainly avoid ‘methanol' as cleaning product.
• Avoid spraying with high pressure cleaner against the overlap.
• Influence of migration of solvent ink towards PVC and adhesive is tested permanently. Solvent inks definitely attack PVC and adhesive properties and characteristics: adhesion, cohesion, deposit of adhesive etc. DON`T UNDERESTIMATE THIS!
• Big losses in adhesion are influenced by the kind of PVC used, the kind and amount of solvents in the ink, conditioning after printing (be aware that ventilation and evaporation of solvents is strictly necessary).
• Recommended application surfaces are: Aluminium, car enamel, glass, stainless steel, ABS, Plexiglas.
• The Vinyl is designed for use on smooth surfaces.
• To prevent smears, let your prints dry completely. When laminating (cold) let your prints dry 20 minutes more before starting to laminate.
• The media and the final plots can be handled and disposed of as photographic vinyl or other similar inkjet vinyl media. For the treatment of ink or ink residue, please refer to your printer manual or supplier.

UP

Vinyl Clear Gloss Adhesive 0,075 mm

Vinyl Clear Gloss Adhesive is a high gloss clear adhesive Polymeric vinyl. The smooth UV protected surface ensures high quality printing with good area fillings and sharp images. This film is the first choice for making high quality applications. Adhesive Vinyl is connected on a PE coated release liner. During printing ideal flat laying properties and better heat transfer to the vinyl.

  • Polymeric calendered quality
  • Gloss clear UV protected adhesive vinyl
  • Excellent printability
  • Brilliant colours with excellent sharp edge definition
  • Cadmium Free
  • Solvent based acrylic adhesive
  • PE (Poly ethylene) Siliconised craft coated double calendered backing paper for better flat laying properties

Applications

  • In and outdoor advertising
  • Fleet marking and Stand building
  • Indoor durable signs and displays
  • Exhibitions and events
  • Shop displays

Special notes
• Vinyl Clear Gloss adhesive is resistant to most oils and fats, fuels, aliphatic solvents, mild acids, salts and alkali as listed above
• Samples of Vinyl Clear Gloss were applied to enamelled steel-sheet one hour before testing. Samples were immersed in the specified test-agent at room temperature then removed after the test times noted above.
• Average durability is 3 to 5 years in middle European conditions.
• Exposure to severe temperatures, intense ultraviolet light, as well as conditions in southern-European countries, tropical, sub-tropical, desert regions, in industrially polluted areas or high altitudes, may reduce durability to four years or less.
• Correct substrate preparation and maintenance of vinyl will enhance durability

UP